论文部分内容阅读
Metal-ceramic Bond Mechanism of the Co-Cr Alloy Denture with Original Rough Surface Produced by Sele
【机 构】
：
State Key Lab of Materials Processing and Die&Mold Technology,Hospital of Stomatology,School of Engi
【出 处】
：
中国机械工程学报
【发表日期】
：
2004年期
其他文献
Experimental Investigation on the Bush Inner Surface Temperature of a High Speed Spiral Oil Wedge Sl
The wear process of PTFE coatings sliding against GCr15-bearing steel ball under vacuum conditions was investigated,and the hardness of the PTFE coatings on bot
Microstructure and Mechanical Properties of AZ91D Magnesium Alloy Recycled from Scraps by Hot-press/
文章从事前预防、事中检查、事后控制3个方面对水利工程施工阶段的质量控制进行了系统的阐述,以期对提高工程监理的工作质量和开展监理工作有一定的启示。
This article sys
The discreteness is a common deficiency which impedes damage indices’ practical application. It is caused by the arbitrary linear combination and some missing
In this paper, responses of a new dual-induction resistivity logging-while-drilling (LWD) tool in 3D inhomogeneous formation models are simulated by the vector
以K2SO4、明矾为激发剂.在实验室分别研究其对钛石膏--粉煤灰复合胶凝材料性能的影响,得出了各体系中硫酸盐激发剂的最佳掺量;掺加各种硫酸盐激发剂均可提高钛石膏--粉煤灰复