马口铁罐的分切、翻边、缩颈、滚筋和封口等制罐工序,历来都是由单机来完成的,即每一台机器只能完成上述工序中的一道工序。而要组成制罐自动生产线,则必须用专用的提升设备及输送装置,将各台单机连接组合。由于各单机运行不同步,且罐身在运行过程中易发生卡阻堵塞现象,使某一单机不得不暂时停机而影响整条生产线的连续运转。为此,各单机之间的罐身输送 Tin cans, cutting, cuffing, necking, rolling tendons and seals and other canning process has always been done by a single machine, that is, each machine can only be completed in one of the above processes. To form an automatic production line canning, you must use special lifting equipment and conveying device, the single station to connect the combination. As the stand-alone operation is not synchronized, and the body in the course of the jam-blocking phenomenon is easy to occur, so that a single machine had to temporarily shut down and affect the continuous operation of the entire production line. To this end, the cans between the single transport