论文部分内容阅读
本文通过载金活性炭解吸电解工业性试验和理论计算分析，认为温控仪的设定值若选定在正好等于载金炭解吸作业所要求的温度，那么热电偶无论安装在解吸柱上的任何位置都不合适。若把热电偶安装在解吸柱的最下方或电加热器中的任何位置，都将使加热器启动频繁，这在生产中也不可取。热电偶位置及其设定值的合理确定与解吸作业的许多条件有关，只有通过工业试验或理论计算才能最终确定。
In this paper, through the desorption of gold-loaded activated carbon industrial experiments and theoretical calculations that the temperature controller if the set value is selected exactly equal to the desorption of gold-loaded desiccant the required temperature, then the thermocouple regardless of any installed on the desorption column The location is not suitable. If the thermocouple installed in the bottom of the desorption column or any place in the electric heater, will start the heater frequently, which is not desirable in the production. The proper determination of the thermocouple position and its setpoint is related to many conditions of the desorption operation and can only be determined by industrial tests or theoretical calculations.