【摘 要】
：
The frequency-dependent absorption coefficients and refractive indexes of three selected pour point depressants (PPDs) are extracted within the spectral range of 0.2–2.5 THz using terahertz time-domain spectroscopy (THz-TDS). The selected PPDs are also ch
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
The frequency-dependent absorption coefficients and refractive indexes of three selected pour point depressants (PPDs) are extracted within the spectral range of 0.2–2.5 THz using terahertz time-domain spectroscopy (THz-TDS). The selected PPDs are also characterized by the middle-infrared spectrum. The experimental results reveal that PPD is more sensitive in the THz range than that in the middle-infrared range. Moreover, the different compositions of PPD can be identified according to their different spectral features in the THz range. Due to its properties of better repeatability, shorter testing time, and easier operation, THz-TDS can be used as a complement for identifying the chemical compositions of PPD.
其他文献
高速激光熔覆能大大提高熔覆效率，但高速激光熔覆层表面容易出现表面粗糙缺陷。采用高速激光熔覆和激光重熔混合工艺，可达到改善熔覆层表面质量、有效提升涂层性能的目的。在液压立柱材料27SiMn表面激光熔覆制备了Fe90不锈钢涂层，利用超景深显微镜、X射线多晶衍射仪分别对熔覆层的表面形貌、微观组织结构、元素分布和物相构成进行了分析，通过硬度试验、耐磨损试验和电化学腐蚀试验对涂层的性能进行了验证。试验结果表明：涂层激光重熔后相比于重熔前表面粗糙度降低了8.5%，涂层内部的微观组织更加细密均匀，没有相的消失和新相的出
针对铝型材表面纹理复杂、缺陷尺度差异大导致缺陷检测算法精度不高,难以满足实际需求的问题,提出了一种改进的目标检测网络AM-YOLOv3 (attention-guided multi-scale fusion YOLOv3)。设计了注意力引导模块和4个预测尺度,实现了铝型材表面缺陷的多尺度特征提取。构建了自底向上的特征传输路径,与原有的特征金字塔网络结合形成双塔结构,实现了多尺度特征融合。使用K-medians算法进行锚框聚类,更准确地表征了锚框尺寸的分布规律,提高了网络的收敛速度。在公开的铝型材数据集上
研究了一种由表面镀铝的磷青铜作为反射面的矩形型波导传输紫外光束的性能。实验结果表明,这种波导能够有效地传输308nm紫外光束,传输率可达72%/m。充入氦气能有效地提高紫外光束的传输率。并对于不同弯曲程度对波导损耗的影响以及如何提高波导传输率,降低弯曲损耗进行了分析。
Photonics-based radar with a photonic de-chirp receiver has the advantages of broadband operation and real-time signal processing, but it suffers from interference from image frequencies and other undesired frequency-mixing components, due to single-chann
Finding subtypes of cancer in breast cancer database is an extremely difficult task because of heavy noise by measurement error. Most of the recent clustering techniques for breast cancer database to achieve cancerous and noncancerous often weigh down the
Due to their good color rendering ability, white light-emitting diodes (WLEDs) with conventional phosphor and quantum dots (QDs) are gaining increasing attention. However, their optical and thermal performances are still limited especially for the ones wi
本文建立了有限几何尺寸板条激光介质的三维温度分布模型.在普遍情况下,推导出温度分布的解析式.由此便于分析板条温度分布和泵浦参数、激光介质等的依赖关系.借助计算机进行的数值计算,证实了理论结果.
针对同轴内啮合的大尺寸齿形结构手动装配模式中测量困难且精度不易保证的问题,提出一种面向齿形结构装配的视觉测量方法。该方法通过构建单目视觉测量系统,利用其图像特征解算空间位姿实现高精度测量。首先基于自适应核与自适应阈值的最小核值相似区算法提取齿顶角点,并采用大津阈值改进的Canny算法检测辅助圆离散弧段;然后结合随机采样一致思想,运用基于几何距离及Levenberg-Marquardt优化的椭圆拟合
依据LED芯片图像构图单一,灰度不均匀的基本特征,提出了一种针对这类图像的新的局部自适应阈值分割算法,实现晶粒分割与计数统计。在阈值的设计中,一方面考虑了图像整体区域灰度特征,同时利用区域与区域中心对比度不同,设计了区域对比率来表示这一特性,通过局部均值和中心点区域对比率来自适应调整阈值的大小,识别出晶粒的准确位置。为了剔除不合格晶粒和噪音干扰,应用基于腐蚀和膨胀操作的图像形态学方法对分割后晶粒进