论文部分内容阅读
笔者利用不锈钢丝根据患者各自的特点,特制记录丝临时固定在简单(牙合)架上,按照记录丝标志进行排牙。15年来修复近2,000副全口义齿。效果较为满意,现介绍如下: 一、制作步骤和方法:按常规方法模灌模及颌位记录。二、制作记录丝:用20号不锈钢丝10～12cm、用鼻钳弯制成圆形柄并形成直角,以便固定在(牙合)架上,下端与下颌体平齐。然后将圆形柄对准蜡堤的中线放置于上颌工作模底部,记录丝对准中线,并与蜡基托唇面靠紧。下端止于下颌体,用蜡固定即可上(牙合)架(见图),
The author uses stainless steel wire according to the patient's own characteristics, special recording wire temporarily fixed in a simple (occlusal) frame, in accordance with the recording wire logo for teeth. Over the past 15 years to repair nearly 2,000 complete dentures. The effect is more satisfactory, are presented below: First, the production steps and methods: According to the conventional method of mold filling and jaw position records. Second, the production of recording wire: No. 20 stainless steel wire 10 ~ 12cm, with a nose pliers bent round handle and form a right angle, so as to be fixed in the (occlusal) frame, the lower end of the flush with the mandibular body. Then the circular handle at the center line of the wax embankment placed in the bottom of the maxillary working mode, the recording wire aligned with the center line, and with the wax base lip tight. The lower end of the mandibular body, with wax fixed on the (occlusion) frame (see photo),