Gas holdup iS one of the Key parameters in flotation process.Gas holclup as measured by a differential pressure method was investigated and the relative errors compared to the average gas holdup from the volume expansion method.The errors were used to establish optimum measurement positions.The results show that the measurement position should be in the middle of the column and in the region half way from the center to the wall (the half-radius).The gas holdup along the axial direction is lower at the bottom and higher at the top of the floatation column.The gas holdup along the radial direction is lower near the wall and higher near the center of the flotation column.The average gas holdup measurement can be replaced bv regional gas holdup values.