【摘 要】
：
A method for measuring the frequency stability of tunable laser is proposed by using confocal Fabry-Perot (F-P) interferometer. The F-P interferometer is used to get the output frequency of the laser as a reference, and the method eliminates the need of a
【机 构】
：
EngineeringResearchCenteronCommunicationDevicesofMinistryofEducation,SchoolofComputerandCommunicatio
【出 处】
：
OptoelectronicsLetters
论文部分内容阅读
A method for measuring the frequency stability of tunable laser is proposed by using confocal Fabry-Perot (F-P) interferometer. The F-P interferometer is used to get the output frequency of the laser as a reference, and the method eliminates the need of an independent optical source as a frequency reference. Using this technique, the frequency stability of the tunable external-cavity diode laser (ECDL) is measured to be 2.26×10-9with an integration time of 20 ms.
其他文献
Mo/Si and SiC/Mg period multilayer mirrors are investigated for solar He-II radiation at 30.4 nm. The optical stabilities of these multilayers are measured before and after space environment simulation tests for the purpose of potential application in spa
针对国内交通标志的属性特征,提出了一种基于颜色和形状的交通标志分类算法。采用RGB模型分量值互减的方法对自然背景下的交通标志图像进行分割,提取出感兴趣区域,对标志区域进行形态学处理、边缘检测,提取标志外层轮廓。利用Hough变换识别交通标志线性特征。在识别交通标志颜色和几何形状的基础上,利用交通标志的分类知识实现交通标志的快速分类。实验结果表明,该方法容易实现,满足实时性要求,并能达到较好的分类效
针对传统红外与可见光图像融合方法存在融合图像场景对比度低、热红外目标不明显、细节与纹理不够清晰的问题,提出了一种基于多尺度低秩分解的红外图像与可见光图像融合方法。该方法通过多尺度低秩分解,将红外图像、可见光图像分别分解为多层次局部低秩图(显著图)和全局低秩图;充分考虑分解图像特点,有针对性地设计最优融合规则,有效融合红外和可见光图像的互补信息;基于融合规则重构融合图像。基于公开数据集进行实验验证。
A method of detecting dry, icy and wet road surface conditions based on scanning detection of single wavelength backward power is proposed in this letter. The detector is used to receive the backward scattered power which changes with the incidence angle.
The third-order optical nonlinearities of dimethyl sulfoxide (DMSO) are investigated using the optical Kerr effect (OKE) and Z-scan techniques with femtosecond pulses. We are able to fit the OKE signal theoretically by convolving the autocorrelation of th
为了提高光诱导击穿光谱(LIBS)技术定量分析的精准度,用LIBS技术对不同合金钢中的Mn元素进行定量分析,结合支持向量回归(SVR)建立定标模型,研究输入向量对SVR模型的影响,并与校正后的内标法进行比较。结果表明:输入向量为内标元素校正和信背比时,测试集的相对标准偏差和相对误差的平均值分别为2.6%和11.97%,回归效果最理想;对合金钢中的Mn元素进行定量分析时,校正后的二元输入向量可以减小参数波动和校正基体效应的影响,为LIBS钢液元素定量分析优化数据输入提供了参考。
自从裂变发现以来的五十年间，已基于这一过程发展出强大的技术，同时对这个现象进行了详细研究。已经发现产生感应核裂变的许多“试样”，首先就是中子。中子感应的裂变仍然是核分裂大多数用途的基础。但是，其它核粒子(质子、氘核、α粒子和重核，以及γ射线、 电子和μ子)之类的非核束也有效。现在，根据Boyer、Luk和Rhodes的研究，由强激光源产生的紫外光感应核裂变也有可能。它将为诊断强场对原子中电子的影响提供一种有价值的工具，还将为脉冲裂变产物和中子提供一种亮点源。
Single-pulse and multi-pulse damage behaviors of "standard" (with \lambda/4 stack structure) and "modified" (with reduced standing-wave field) HfO2/SiO2 mirror coatings are investigated using a commercial 50-fs, 800-nm Ti:sapphire laser system. Preci
A high-precision temperature-controlled narrow band-stop fiber Bragg grating (FBG) filter and light source self-calibration technique are proposed for application in the Brillouin optical time domain re°ectometer (BOTDR) sensor system. With the proposed a
本文进行了自发参量下转换(SPDC)产生795 nm关联光子对的实验研究。选择Ⅱ类PPKTP晶体作为非线性介质,用倍频获得的3975 nm紫光作为泵浦光。在实验上首先通过符合计数测量了紫光单次穿过PPKTP晶体时SPDC过程产生的光子对亮度,当泵浦光功率为5 mW时,测得符合计数为53 150/s。然后将下转换过程放入光学谐振腔中,对下转换光子的线宽进行压窄。实验上测得下转换光子对的关联时间为14.6 ns,对应线宽约为15 MHz。本文为纠缠光子对在Rb原子系综中的存储提供了实验基础。