【摘 要】
:
The cathode materials LiMn204 and rare earth elements La-doped or La and F dual-doped spinel lithium manganese oxides were synthesized by the citric acid-assist
【机 构】
:
College of Material Science and Chemical Engineering
论文部分内容阅读
The cathode materials LiMn204 and rare earth elements La-doped or La and F dual-doped spinel lithium manganese oxides were synthesized by the citric acid-assisted sol-gel method. The synthesized samples were investigated by differential thermal analysis (DTA) and thermogravimetry (TG) measurements, X-ray diffraction (XRD), scanning electronic microscope (SEM), cyclic voltammetry (CV), and charge-discharge test. XRD data shows that all the samples exhibit the same pure spinel phase, and the LiLa0.01Mn1.9903.99F0.01 and LiLao.01Mnl.9904 samples have smaller lattice parameters and unit cell volume than LiMn2O4. SEM indicates that LiLao.01Mnl.9903.99F0.01 has a slightly smaller particle size and a more regular morphology structure with narrow size distribution. The charge-discharge test reveals that the initial capacities of LiMn2O4, LiLa0mMnl.9904, and LiLa0.01Mn1.99O3.99F0.01 are 129.9, 122.8, and 126.4 mAh-g-1, and the capacity losses of the initial values after 50 cycles are 14.5%, 7.6%, and 8.0%, respectively.The CVs show that the La and F dual-doped spinel displays a better reversibility than LiMn2O4.
其他文献
在对现有经典交通流元胞自动机模型进行总体分析的基础上,结合我国城市交通现状,重新标定了元胞长度和最大速度等参数,制定了车道转换规则,提出了公交车辆的减速入站和慢速启
Considering the instability of data transferred existing in high speed network.a near method is proposed for improving the stability using control theory.Under
Equal channel angular pressing (ECAP) is an effective thermo-mechanical process to make ultrafine grains.An investigation was carried out on the friction stir w
A practical catalytic method to oxidize α-ionone with molecular oxygen using N-hydroxyphthalimide(NHPI) combined with acetylaeetone cobatt(Ⅱ) (Co(acac)2) was
In the light of the localized progressive damage model, the evolution law of cohesive and frictional strength with irreversible strains was determined. Then, th
Fe-Cr-Mo-Ni-C-Co alloy was quenched in liquid nitrogen and held for 24 h. Hardness tester, OM, XRD, SEM were used to investigate the mechanical properties and m
The multivalued general mixed implicit equilibrium-like problems are introduced and studied.To solve these problems,a new predictor-corrector iterative algorith
Based on the problem that the service entity only has the partial field of vision in the network environment, a trust evolvement method of the macro self-organi
Two thermomechanical coupled elastic-plastic finite element (FE) models were developed for predicting the 12-pass continuous rolling process of GCr15 rod and wi
The electrochemical behaviors of n-type silicon wafers in silica-based slurry were investigated, and the influences of the pH value and solid content of the slu