论文部分内容阅读
High boron hardfacing alloys reinforced with primary M2B phases on Q235 steel plates were prepared by the method of flux-cored wire submerged arc welding.The microstructure and boride morphology were investigated using optical microscopy (OM),scanning electron microscopy (SEM) and X-ray diffraction (XRD).The effect of WC/W2C on the microstructure was discussed.It indicated that the volume fraction of primary M2B phases has increased due to good nucleated cores of incompletely molten W2C particles provided by casting tungsten carbide or decarburizing reaction of WC powders.Abrasion resistance was evaluated by wet sand rubber wear tests and the wear mechanism was studied using SEM.It shows that primary M2B grains play a key role in improving abrasion resistance.
High boron hardfacing alloys reinforced with primary M2B phases on Q235 steel plates were prepared by the method of flux-cored wire submerged arc welding. Microstructure and boride morphology were investigated using optical microscopy (OM), scanning electron microscopy (SEM) and X- ray diffraction (XRD). The effect of WC / W2C on the microstructure was discussed. It indicates that the volume fraction of primary M2B phases has increased due to good nucleated cores of incompletely molten W2C particles provided by casting tungsten carbide or decarburizing reaction of WC powders. Abrasion resistance was evaluated by wet sand rubber wear tests and the wear mechanism was studied using SEM. It shows that primary M2B grains play a key role in improving abrasion resistance.