论文部分内容阅读
Friction and Wear Behaviors of Ti/Cu/N Coatings on Titanium Alloy Surface by DC Magnetron Sputtering
【机 构】
:
College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China;Shanxi Pr
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
【发表日期】
:
2017年1期
其他文献
Microstructure and Mechanical Properties of Nb-B bearing Low Carbon Steel Plate: Ultrafast Cooling v
The microstructure and mechanical properties of low carbon bainite high strength steel plate were studied via different cooling paths at the pilot scale.There was a significant increase in mechanical properties,and notably,the yield strength,tensile stren
Comparative Study on Oxidation Behavior of Fe-5wt% Cr Alloy in Various Mixed Atmospheres at 900-1000
The high-temperature oxidation behavior of Fe-5wt% Cr alloys was investigated in both N2+5vol% H2O and N2+21vol% O2+5vol% H2O atmospheres at 900-1000 ℃ for 120 min by the thermo-gravimetric analysis (TGA). The oxidation kinetics, phase composition and cro
The objective of this study was to investigate the effect of a new combined micro/nano-scale implant surface feature on osteoblasts\' behaviors including cell morphology,adhesion,proliferation,differentiation,and mineralization in vitro.A new micro/nano
Thermodynamic and Kinetic Studies of Effective Adsorption of 2,4,6-trichlorophenol onto Calcine Mg/A
The inlfuence of pre-deformation and heat treatment on mechanical properties of as-extruded ZK60 alloy was investigated. The experimental results indicated that the solid solution, pre-cold rolling and artificial aging treatments remarkably improved the m
To understand the effects of spray parameters on the splashing, cast iron particles were plasma-sprayed onto polished surfaces of aluminum substrate to form single splats. Various plasma arc powers and spray distances were applied to adjust the morphology
Ballistic Performance and Damage Characteristics of Chemical Vapor Infiltration Quasi 3D-Cf/SiC Comp