Grain Refining Performance of SHS Al-50TiC Master Alloys for Commercially Pure Aluminum

来源 :武汉理工大学学报英 | 被引量 : 0次 | 上传用户:dongjuanqiu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
An Al-50wt%TiC composite was directly synthesized by self-propagating high-temperature synthesis (SHS) technology,and then was used as a grain refining master alloy for commercially pure aluminum.The microstructure and grain refining performance of the synthesized master alloy were emphatically investigated.The SHS master alloy only contained submicron TiC particles except for Al matrix.Moreover,TiC particles were relatively free of agglomeration. Grain refining tests show that adding only 0.1 wt% of the master alloys to the aluminum melt could transform the structure of the solidified samples from coarse columnar grains to fine equiaxed grains (average grain size 120μm),and that this grain refining effectiveness could be maintained for almost 1.5h at 1003K. Therefore,it is concluded that the SHS master alloy is an effective grain refiner for aluminum and its alloys, and that it is highly resistant to the grain refining fading encountered with most grain refiners.
其他文献
Based on a set of microoptics the output radiation from a continuous wave (CW) linear laser diode array is coupled into a multi-mode optical fiber of 400 μm di
An 80 nm bandwidth long wavelength erbium-doped fiber amplifier using a seed light injection method is designed.It is shown that when the wavelength of the seed
Normal spinel LiMn2O4 was synthesized by sol-gel method using lithium nitrate,manganese nitrate,citric acid and ethylene glycol as raw materials. LiMn2O4 was ch
Al62.5Cu25Fe12.5 alloy was prepared by arc melting. It was found that the formation of quasicrystalline phase is related to the condition of annealing, such as
A new superstructure form of heat exchanger networks (HEN) is proposed based on expert system (ES).The new superstructure form is combined with the practical en
The manner by which the particles settle in the laminar flow region is first described and the characteristics of co-sedimentation of two-species particles are
The bonding of steel plate to Al-7graphite slurry was studied for the first time. The relationship model about preheat temperature of steel plate,solid fraction
The synthesis and characterization of a series of novel poly(aryl amide imide)s based on o-diphenyltrimellitic anhydride are described.The poly(aryl amide-imide
The structure characteristics of ID precision ultrathin monocrystalline silicon section cutting machine-tool spindle with force-monitoring bearings functioning
AIM: Matrix metalloproteinase-1 (MMP-1) and tissue inhibitor of matrix metalloproteinase-1 (TIMP-1) are central to the spontaneous resolution of liver fibrosis.