在奥德萨轧钢厂的700二辊式薄板轧机上,已按装了一个板坯机械化传送机构。此机构不同于其它工厂里所应用的升降台,能使轧机同时轧制(均整或叠轧)两块或三块板坯。它没有可逆的链传动装置,并且安装在车间地面的轨道上,因此,维修和换辊时,可从很容易地从机座中移出来,同时也不要求有专门的基础。机组所需的电机总功率约为5瓦。 At the Odessa mill’s 700 two-roll sheet metal mill, a slab mechanized conveyor has been installed. This mechanism is different from the elevators used in other factories and enables the rolling mill to roll (roll or roll) two or three slabs simultaneously. It has no reversible chain drive and is mounted on the track in the shop floor so that it can easily be removed from the stand for service and roll change without requiring a special foundation. The total motor power required for the unit is about 5 watts.