1　故障现象在点片过程中 ,机器出现夹片。用常规方法处理 ,首先查看供、收片盒 ,证实没有被夹的片子 ,复位后 ,机器显示依然是夹片 ,再查密着板 ,此时密着板的位置不在床的中央 ,而控制台上按键无法使其移动。将床竖起 ,在床后下端盖板下有一个电机带动的齿轮 ,关机后用手转动 1 Failure phenomenon During the spotting process, the machine appears clips. With conventional methods of processing, first check the supply and collection cassettes and verify that there are no clips. After the reset, the machine displays still clips, and then check the plates. At this time, the position of the adhesive plate is not in the center of the bed, but on the console. It cannot be moved by pressing a key. Put the bed upright, under the bed cover under the bottom of the bed has a motor driven gear, turned off after turning by hand