论文部分内容阅读
机95(一)25型25吨闭式精密压力机适用于电讯、电子仪表、钟表及光学仪器等工业的薄板工件的冲孔、落料与修边等工作,还可作震动压力加工及精密冲压,如震动修边,其工件加工表面光洁度可由原来的▽3提高到▽▽▽7～▽▽▽8。当用手动送料时,可进行单次冲压,从前后方向进行;当使用自动送料时可进行连续冲压,而从左右方向进行。自动送料中装有校正机构,可校平板料、带料及条料。在机床滑块上面及工作台下面,均设有顶出机构。机床结构采用了肘杆传动及凸轮震动机构,并带有自动送料装置。传动方式为二级,电动机具有两种速度(以供震动与不震动冲压用),并采用压合式转键离合器;制动则采用间
95 (a) 25 25 tons of closed precision press for telecommunications, electronic instruments, watches and optical instruments and other industrial sheet metal punching, blanking and trimming work, but also for vibration pressure processing and precision Stamping, such as shaking trimming, the workpiece surface finish can be improved from the original ▽ 3 to ▽ ▽ ▽ 7 ~ ▽ ▽ ▽ 8. When using manual feeding, can be a single stamping, from front to back direction; when using automatic feeding can be carried out continuous punching, but from the left and right direction. Equipped with a correction mechanism for automatic feeding, which can flatten the sheet, strip and strip. In the top of the machine slider and table below, are equipped with a top body. The machine structure uses a toggle lever drive and cam vibration mechanism, and with automatic feeding device. Transmission mode is two, the motor has two speeds (for vibration and non-vibration stamping), and the use of compression clutch clutch; brake is used between