High power terahertz quantum cascade laser

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:kkfhvk1
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We present high power terahertz quantum laser at about 3 THz based on bound-to-continuum active region design. At 10 K, corrected by the collection efficiency, the maximum peak power of 137 mW is obtained in pulsed mode. What’s more, we firstly introduce monolithically integrated THz quantum cascade laser (QCL) array and the maximum peak power increased to 218 mW after correction. In total, the array shows better performance than single device, implying cheerful prospect.
其他文献
期刊
提出一种新的光栅条纹投影轮廓测量术系统模型,新模型不要求测量系统满足光心连线平行于参考面、成像系统光轴垂直于参考面以及两光轴相交于参考面上等约束条件,只需投射至参考平面的正弦光栅条纹之间相互平行,简化了系统校准过程,有利于现场测量。得到的高度相位映射关系式中,待标定的系数与像点的坐标无关,不需要对每一个像点进行采样,能够减少系统标定所需的时间。实验表明:所提方法使投影装置和成像系统的位置校准过程简
期刊
Intense 2.7-\mu m emissions are obtained from Er3 /Nd3 co-doped tellurite glass samples under the 808-nm laser diode excitation. According to the absorption spectra, Judd-Ofelt parameters and radiative transition probabilities are calculated and analyze
In this paper, we studied portable blue and red light-emitting-diode (LED) light sources in phototherapy for mild to moderate acne vulgaris to evaluate the efficacy and tolerance of patients. Patients, randomly divided into blue and red groups, received e
标定方法一直是线结构光三维测量系统研究的关键要素。重点讨论了线结构光传感器标定方法中的三个问题:标定靶物、光平面标定方法以及标定精度评定方法的比较。首先,总结了常用的标定靶物类型及其标定特点,为标定靶物的选型提供参考;然后,按照标定靶物和传感器标定时的相对运动关系,将当前主要的光平面标定方法划分为三类,分别是靶物与传感器位置关系固定不动的标定方法、靶物与传感器之间存在可控运动的标定方法以及靶物与传
针对土壤含水率对X射线荧光光谱(XRF)法检测结果存在严重干扰的问题,提出了一种基于灰狼优化(GWO)算法的支持向量回归(SVR)校正预测模型。完成光谱数据预处理之后,基于GWO-SVR建立净峰面积、含水率与镉元素含量之间的定量分析模型,并将GWO-SVR模型与其他模型对比。结果表明:SVR非线性模型比线性回归模型有更好的决定系数、更小的误差,在GWO下,各个模型指标均得到提升;与其他优化算法相比,GWO-SVR迭代次数更少,拟合效果更好,预测误差更小。所提模型也可为土壤中其他重金属含量的预测及含水率校正
To exploit the parallelism of optics in data processing, a suitable number system and an efficient encoding/decoding scheme for handling the data are very essential. In the field of optical computing and parallel information processing, several number sys
报道一台采用调Q红宝石激光器泵浦的高增益角度调谐LiNbO_3光参量振荡器.最大输出能量和转换效率分别高达50mJ/pulse和19%.该振荡器从1.1444μm到1.7652μm连续可调谐.
期刊