不同直径股骨头对高交联聚乙烯髋臼内衬磨损影响的初步研究

来源 :中国修复重建外科杂志 | 被引量 : 0次 | 上传用户:xsyangle
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
目的 探讨人工全髋关节置换术(total hip arthroplasty,THA)中采用不同直径股骨头对高交联聚乙烯(highly cross-linked polyethylene,HXLPE)髋臼内衬磨损的影响.方法 回顾分析2004年1月-2007年12月,41例(43髋)因髋部疾病采用不同直径股骨头及HXLPE髋臼内衬行THA治疗的患者临床资料.男22例(23髋),女19例(20髋);年龄35~89岁,平均60.2岁.股骨颈骨折26髋,股骨头缺血性坏死8髋,骨关节炎5髋,风湿性关节炎2髋,先天性髋臼发育不良2髋.按股骨头直径将患者分为两组:A组25例(26髋)采用普通直径(26、28 mm)球头HXLPE髋臼内衬,B组16例(17髋)采用大直径(32、36、40 mm)球头HXLPE髋臼内衬.比较两组患者股骨头累积穿透位移值、内衬线性磨损率和临床疗效.结果 术后患者切口均Ⅰ期愈合,无感染、下肢深静脉血栓形成及神经损伤等并发症发生.两组患者均获随访,随访时间5~9年,平均5.7年.均未行二期翻修术.两组术后3、6个月及1、2、3、4、5年Harris评分均较术前显著提高(P< 0.05);术后各时间点间比较,差异均无统计学意义(P>0.05);手术前后各时间点两组间比较,差异均无统计学意义(P>0.05).术后即刻A、B组髋臼外展角分别为(31.4±3.8)°和(32.3±4.1)°,比较差异无统计学意义(t=0.482,P=0.621).末次随访时,两组均无患髋发生影像学松动及临床松动现象.A、B组各1例(1髋)于术后5年发现髋臼1、2、3区X线透亮带(均<1mm),股骨假体周围未发现透亮带.A、B组术后1~5年每年股骨头累积穿透位移值比较,差异均无统计学意义(P>0.05).A、B组术后线性磨损率分别为(0.026±0.007)mm/年和(0.025±0.007)mm/年,比较差异无统计学意义(t=0.708,P=0.483).结论 HXLPE髋臼内衬磨损率极低,是人工关节界面理想选择;不同直径股骨头对HXLPE髋臼内衬磨损的影响无显著差异.“,”Objective To investigate the effects of the femoral head size on the linear wear rate of highly crosslinked polyethylene (HXLPE) liner in total hip arthroplasty (THA).Methods A retrospective analysis was performed on the clinical data of 41 patients (43 hips) who underwent primary THA with HXLPE liner and different sizes of femoral heads between January 2004 and December 2007 for hip diseases.There were 22 males (23 hips) and 19 females (20 hips) with a mean age of 60.2 years (range,35-89 years),including femoral neck fracture (26 hips),avascular necrosis of femoral head (8 hips),osteoarthritis (5 hi ps),rheumatoid arthritis (2 hi ps),and congenital hi p dysplasia (2 hi ps).According to the size of the femoral head,the patients were divided into 2 groups:standard head size (26 and 28 mm) was used in 25 cases (26 hips,group A) and big head size (32,36,and 40 mm) in 16 cases (17 hips,group B).The cumulative penetration of the femoral head,linear wear rate,and effectiveness were evaluated and compared between 2 groups.Results All the incisions healed by first intention,no complications of infection,deep vein thrombosis,or nerve injury occurred.The patients were followed up 5-9 years (mean,5.7 years).No two-stage revision was needed.Harris score was significantly improved at 3 months,6 months,and 1,2,3,4,and 5 years after operation when compared with preoperative score in each group (P < 0.05),but no significant difference was found between different time points after operation in 2 groups (P > 0.05),and between 2 groups at each time point (P > 0.05).Acetabular abduction angle was (31.4 ± 3.8)° in group A and (32.3 ± 4.1)° in group B,showing no significant difference (t=0.482,P=0.621).At last follow-up,no radiographic or clinical loosening was observed in each group.At 5 years after operation,X-ray results ofacetabular components showed radiolucent line (< 1 mm) in 1 case (1 hip) and 1 case (1 hip) of 2 groups respectively;but X-ray results of femoral components showed no radiolucent line.There was no significant difference in the cumulative penetration of the femoral head between 2 groups at 1,2,3,4,and 5 years after operation (P > 0.05).The linear wear rate was (0.026 ± 0.007) mm/year in group A and (0.025 ± 0.007) mm/year in group B,showing no significant difference between 2 groups (t=0.708,P=0.483).Conclusion No association is found between femoral head size and the linear wear rate of HXLPE liner.It is an ideal interface of THA because of its low linear wear rate.
其他文献
本文详细介绍了对φ550粗轧机孔型的优化.通过采用强迫宽展的原理,以及增加K5、K6轧槽的数量,提高了轧槽产量,确保了粗轧料形稳定,提升了产品质量.
近年来,武钢热轧厂发挥自己的设备装备和技术水平,在开发集装箱纵切带钢产品中,积极开展了调查、分析、试验等攻关活动,通过设备改造,工艺改进等措施,使集装箱用热轧纵切带钢
目的 BMSCs作为雪旺细胞的替代细胞可提高周围神经损伤修复效果,但目前对于神经支架内添加适宜的种子细胞数量未达成共识。研究不同数量BMSCs对大鼠背根神经节(dorsal root g
根据本钢CDCM冷轧机的特点和主控操作员的经验,为改善轧机负荷分配,对不同钢种和规格带钢的压下率进行优化,并取代了原有轧制预设定表中的压下率分配,有效提高轧制速度和轧制
目的地塞米松是MSCs成骨诱导分化的基础试剂,探讨诱导脂肪干细胞(adipose-derived stem cells,ADSCs)成骨分化过程中地塞米松的优选浓度,为进一步骨组织工程研究提供理论依据
目的 探讨关节镜下治疗半月板内型囊肿的方法及疗效.方法 2005年1月-2009年12月,对9例半月板内型囊肿患者于关节镜下行切除囊肿治疗.其中男5例,女4例;年龄24~46岁,平均33.8岁.
本文从轧机液压压下系统工作原理人手,分析了唐钢1650mm可逆冷轧机数字化液压压下系统工作原理,并剖析了该轧机液压压下控制器的数字化改进和液压伺服阀流量线性化控制策略.
上节:論教育爲工農服務的方針中華人民共和國的教育是新民主主義的教育,即民族的、科學的、大衆的教育,這在毛主席的著作中,在人民政協共同綱領中,已經规定得很明確了。在目
通过某冷轧平整机轧制力模型的理论计算和控制方法的分析,根据轧件平整轧制时塑性变形量很小,变形沿带材高度不均匀分布的特点,采用沿高度应力均匀分布的平面假设将带来比较
会议
本文主要介绍SKF在线状态监测系统设备的分布、组成,在冷轧机组变载、变速的生产轧制情况下如何对轧机主齿轮座和卷取机进行在线状态监测及故障分析.