论文部分内容阅读
控制轧制是在热轧过程中,通过对金属加热、轧制和冷却的合理控制,使范性形变与固态相变过程相结合,以获得良好的晶粒组织,使钢材具有优异的综合性能的轧制技术。控制轧制是在热轧过程中把金属范性形变和固态相变结合起来而省去轧后的热处理工序。这是既能生产出强度、韧性兼优的钢材,而又能节约能耗的一项新工艺。
控制轧制
【摘 要】
：
控制轧制是在热轧过程中,通过对金属加热、轧制和冷却的合理控制,使范性形变与固态相变过程相结合,以获得良好的晶粒组织,使钢材具有优异的综合性能的轧制技术。控制轧制是在
【出 处】
：
制造技术与机床
【发表日期】
：
2016年4期
其他文献
Studying Design and Use of Healthcare Technologies in Interaction: The Social Learning Perspective i
Designing technologies is a process that relies on multiple interactions between design and use contexts. These interactions are essential to the development an
Individual Income Status Correlates with Chronic Kidney Disease in Japan beyond Metabolic Risk Facto
Background: Chronic kidney disease (CKD) is a pre-condition for end-stage kidney disease (ESKD) undergoing hemodialysis, as well as a risk factor for cardiovasc
Health, Aging and Quality of Life: An Evaluation of Experience in Family Health Unit through Popular
This study aims to assess the implementation of the Health, Aging and Quality of Life. The specific objectives were executed by conducting activities with the e
机床垫铁的刚度阻尼特性对整机动态性能有着重大影响。在分析机床垫铁结构的基础上,利用基于经验数据的计算方法和基于实验测试的辨识方法,分别得到了垫铁的刚度阻尼特性参数
为提高工业机器人示教器数据通信性能,改善示教器人机界面设计,提出了一种基于以太网通信和嵌入式Windows CE开发的机器人示教器软件设计方案。该方案在通信实现上基于Google
由于绝缘支撑杆浇注模具的关键件模套的型腔尺寸和表面粗糙度精度等级要求较高,且左模和右模的型腔在分型面结合部位容易产生错位,导致模套的加工质量难以保证,进而影响到浇
<正>在80年代韧期,我国棉花产量急剧增加,在棉花加工中要求提高轧花效率。而当时棉花加工业却处于设备陈旧不配套,工艺简陋不合理的被动局面,一直沿用的是5571型轧花工艺。为
Thermal stresses in the combustor of gas-turbines are computed using non-dimensional parameters. Buckingham pi theorem was used to arrange the listed relevant p
Poisoning by insecticides is a public health problem, particularly in developing countries. Insecticide poisoning may occur due to ingestion, inhalation or skin