【摘 要】
：
We demonstrate a blind zone-suppressed and flash-emitting solid-state Lidar based on lens-assisted beam-steering technology. As a proof-of-concept demonstration, with the design of a subwavelength-gap 1D long-emitter array and multiwavelength flash beam e
【机 构】
：
StateKeyLaboratoryofAdvancedOpticalCommunicationSystemsandNetworks,DepartmentofElectronicEngineering
【出 处】
：
PhotonicsResearch
论文部分内容阅读
We demonstrate a blind zone-suppressed and flash-emitting solid-state Lidar based on lens-assisted beam-steering technology. As a proof-of-concept demonstration, with the design of a subwavelength-gap 1D long-emitter array and multiwavelength flash beam emitting, the device was measured to have 5% blind zone suppression, 0.06°/point-deflection step, and 4.2 μs scanning speed. In time-of-flight ranging experiments, Lidar systems have a field of view of (normal device) or (blind-zone suppressed device), far-field number of resolved points of 192, and a detection distance of 10 m. This work demonstrates the possibility that a new integrated beam-steering technology can be implemented in a Lidar without sacrificing other performance.
其他文献
Unlike organic–inorganic hybrid perovskites, all-inorganic cesium lead halide perovskites hold great promise for developing high-performance optoelectronic devices, owing to their improved stability. Herein, we investigate the perovskite-related CsPb2Br5
根据Hopfield神经网络的优化功能,对综合鉴别函数进行二元优化,使相关输出具有期望的形状及峰值大小,从而实现旋转不变识别,并定义了一个判别依据——判别比.计算机模拟的结果表明,目标物体通过优化的二元滤波器后,不仅具有期望输出,而且判别比要比伪目标物体至少大一个量级.
In order to improve the precision of the laser–radio-frequency (RF) synchronization system from sub-picosecond to femtosecond (fs), a synchronization system between a picosecond laser and a 1.3 GHz RF generator has been developed based on a fiber-loop opt
用空间扩展宽谱光源再现的彩虹全息像时,整个光源只在一定的光谱的和空间的“有效宽度”内起作用,本文在此概念的基础上,研究了光源的光谱扩展和空间扩展在其单独作用和联合作用时对全息像的影响。发现当两者联合作用时,对像质的总影响几乎与它们单独作用时一样。给出了用宽谱空间扩展光源所再现的彩虹全息像的分辨率,从而提出了一个实用的狭缝宽度。
利用损伤点之间的位置关系,根据光学元件损伤暗场图像的特点设计了一种基于连接向量特征匹配的配准方法。该方法首先对基准图像及待配准图像分别进行图像预处理,提取损伤点轮廓的中心坐标作为损伤点的位置值。然后构建损伤点连接向量,求出主方向并计算主方向下的连接向量特征,使用连接向量匹配获得匹配点对,最后利用RANSAC算法对匹配点对进行仿射变换参数计算。该方法具有旋转不变性,尺度不变性以及较高的配准准确度。实
We report an electro-optically (EO) tunable microdisk laser fabricated on the erbium (
本文首次报道ZnS干涉滤光片双稳器件中的自再生脉冲现象,并对器件产生这一不稳定性的条件和过程进行了分析及模拟计算,该器件有可能作为光学脉冲发生装置用于数字光计算研究,演示了光计算回路的逻辑功能.
研究了大气衰减、湍流、瞄准误差和空间相关性共同作用的联合效应对大气无线光多输入多输出(MIMO)系统误码率(BER)的影响。利用泊松计数模型和指数相关模型,推导了联合效应下脉冲位置调制(PPM)的最大似然检测准则;采用Wilkinson近似方法推导了大气光MIMO系统BER的上界;仿真分析了联合效应中各因素对大气光MIMO系统BER的影响。结果表明,当大气衰减确定时,空间相关性对系统BER的影响最显著,抖动误差次之,湍流影响最小;当大气衰减变化时,传输距离是影响BER的最重要因素;另外,空间分集对系统性能