正常启动和装载 启动前必须检查机油油面,并旋转曲轴几转。载运必须按本车型所规定的装载要求进行,不能超载。 定期换油 机油和齿轮油用了一定时间后,就会变质,需要更换,同时还要清洗或更换粗。细滤清器或滤芯、润滑油,除按出厂规定时间、行驶里程更换外,还须按季节更换。 合理运用离合器 启步时要正确运用快、停、慢3个步骤。快,就是在离合器主动盘与被动盘刚接触之前踏板的这部 Normal start-up and loading must be checked before starting oil level, and rotate the crankshaft a few turn. Carriage must be carried out according to the loading requirements specified in this model, and can not be overloaded. Regular oil change Oil and gear oil with a certain period of time, it will deteriorate, need to be replaced, but also to clean or replace the coarse. Fine filter or filter, lubricating oil, in addition to factory-specified time, mileage change, but also to be seasonally replaced. Rational use of clutch start-up to the proper use of fast, stop, slow 3 steps. Fast, this is the clutch before the active disk and the passive disk just touch this part of the pedal