论文部分内容阅读
镇江大港港口的1000m~3倒锥形钢筋混凝土水塔由基础、筒身和水柜三部份组成。筒身外径5000mm,壁厚300mm,高40.3m。内设钢休息平台六层,采用滑模施工,预制水柜为350~#钢筋混凝土薄壳结构,外径22.12m,高9.83m,下锥壳锥度1:2,正锥和反锥分二次立模现浇,筒身施工结束后围绕筒身在地面预制,下环梁与筒身之间间隙为50mm,达到100%强度后整体提升到规定
The 1000m~3 inverted cone reinforced concrete water tower in the port of Zhenjiang Dagang consists of three parts: foundation, barrel body and water tank. The barrel has an outer diameter of 5000mm, a wall thickness of 300mm and a height of 40.3m. The steel rest platform is built with six floors and is constructed with sliding mode. The prefabricated water tank is a 350~# reinforced concrete thin shell structure with an outer diameter of 22.12m, a height of 9.83m, a taper of 1:2 for the lower cone, and two points for the forward and reverse cones. The secondary mold is cast in place, and the tube body is prefabricated around the shaft body after construction. The gap between the lower ring beam and the barrel body is 50 mm, and the overall height is up to the standard after reaching 100% strength.