论文部分内容阅读
脱皮花生仁是近年来出口花生产品中主要品种之一,其投资可大可小,设备可土可洋,是当今乡镇企业出口创汇的理想项目。现将生产工艺介绍如下:一、工艺流程原料验收→筛选分级→挑选→烘烤→冷却→人工脱皮→精选包装→检验入库二、生产工艺1、原料验收根据原料验收质量标准进行验收。要求花生米颗粒饱满,大小较均匀,水分<8.5%,杂质<0.5%,且无沙石、泥块等外来杂质,不完善粒<5%(不完善粒包括破碎粒、不熟粒、虫蚀粒、损伤粒等),花生仁脱皮后呈乳白色。2、筛选分级①验收合格的花生米根据需要的规格级别进行筛选,要求筛选后的花生米规格级别符合标准。筛选时,一般每小时检验一次花生米规格级别,发现不合格时,要立即停止筛选机调整,直至调整合格。②花生米规格级别一般有如下几种(粒/盎司):24-28、28-32、34-38、35-40、40-50、50-60、60-70,例:24-28即读为24粒至28粒。盎司是英制单位,1盎司等于28.35克。
Peeled peanut is one of the main varieties of peanut products exported in recent years. Its investment can vary from country to country. It is the ideal project for township enterprises to export and earn foreign exchange. The production process is introduced as follows: First, the process of raw materials acceptance → screening grading → pick → bake → cooling → artificial peeling → Featured Packaging → test storage Second, the production process 1, acceptance of raw materials Acceptance of raw materials acceptance criteria. Requires peanuts full of particles, the size of more uniform, less than 8.5% moisture, impurities <0.5%, and no sand, mud and other foreign impurities, imperfect particles <5% (imperfect particles, including broken particles, Eclipse grain, damage grain, etc.), peanut was milky white after peeling. 2, screening grading ① acceptance of qualified peanuts according to the specifications of the level of screening, requiring screening of peanuts specifications to meet the standards. Screening, the general inspection once an hour peanut specifications level, found to be unqualified, to immediately stop the screening machine adjustment until the adjustment is qualified. ② peanut specifications generally have the following levels (grain / ounce): 24-28,28-32,34-38,35-40,40-50,50-60,60-70, for example: 24-28 that is Read from 24 to 28 capsules. Ounces are in English units, 1 ounce equals 28.35 grams.