【摘 要】
：
A novel Cu-based P/M aircraft brake material was prepared and the effects of sintering pressure and temperature on microstructure and tribological characteristi
【机 构】
：
State Key Laboratory of Powder Metallurgy
论文部分内容阅读
A novel Cu-based P/M aircraft brake material was prepared and the effects of sintering pressure and temperature on microstructure and tribological characteristic were investigated. For the constant sintering temperature, when the sintering pressure increases from 0.5 MPa to 1.5 MPa, the porosity, wear loss and friction coefficient decrease remarkably. When the sintering pressure increases from 1.5 MPa to 2.5 MPa, the porosity further decreases but in a little degree and wear behaviors are improved slightly.However, once the sintering pressure is larger than 2.5 MPa, it has no obvious effect on microstructure and tribological characteristic.For the constant sintering pressure, when the sintering temperature increases from 900 ℃ to 930 ℃, the sintered density remarkably-increases, and wear behaviors are obviously improved. For further increasing sintering temperature to 1 000 ℃, the density keeps on increasing, but wear behaviors change slightly.
其他文献
Chloride ion critical content was studied under soaking and cycle of dry and wet conditions,with three electrochemical nondestructive measuring techniques, i e,
Synthetic Aperture Radar (SAR) has become one of the important tools for shallow water bathymetry surveys. This has significant economic efficiency compared wit
ZnO nanopowders were prepared by oxidizing Zn vapor in the atmosphere of mixture gas of Ar and O2 at low pressure. Tetrapod nanowhiskers synthesized at a pressu
A preferable honeycomb ceramics of Al2TiO5-TiO2-SiO2 doped by CeO2 and Er2O3 with high performance was prepared by means of extrusion molding and the effects of
The cotyledons of cucumber were used to investigate the effects of Nd3+ and La3+ on physiological characters in respect of plant resistance. The cucumber cotyle
The detailed kinetic model of selective non-catalytic reduction (SNCR) of nitric oxide, including sodium species reactions, was developed on the basis of recent
The organic gel-thermal reduction process was successfully used for the preparation of magnetic metal Ni, Fe, Fe-Ni fine fibers from raw materials of citric aci
To get high purity caprolactam is a challenging task in the chemical fiber industry. To date, reports on the prediction of the distribution of caprolactam and i
The decomposition reactions of monazite and bastnaesite mixed rare earth minerals calcined by CaO-NaCl-CaCl2 were studied by means of TG-DTA and XRD. The result