Compared with the conventional single-roller spinning process,the double-roller clamping spinning(DRCS)process can effectively prevent the sheet metal surface wrinkling and improve the the production efficiency and the shape precision of final spun part.Based on ABAQUS/Explicit nonlinear finite element software,the finite element model of the multi-pass DRCS for the sheet metal is established,and the material model,the contact definition,the mesh generation,the loading trajectory and other key technical problems are solved.The simulations on the multi-pass DRCS of the ordinary Q235A steel cylindrical part with the arc-shaped surface flange are carried out.The effects of number of spinning passes on the production efficiency,the spinning moment,the shape error of the workpiece,and the wall thickness distribution of the final part are obtained.It is indicated definitely that with the increase of the number of spinning passes the geometrical precision of the spun part increases while the production efficiency reduces.Moreover,the variations of the spinning forces and the distributions of the stresses,strains,wall thickness during the multi-pass DRCS process are revealed.It is indicated that during the DRCS process the radical force is the largest,and the whole deformation area shows the tangential tensile strain and the radial compressive strain,while the thickness strain changes along the generatrix directions from the compressive strain on the outer edge of the flange to the tensile strain on the inner edge of the flange.Based on the G-CNC6135 NC lathe,the three-axis linkage computer-controlled experimental device for DRCS which is driven by the AC servo motor is developed.And then using the experimental device,the Q235A cylindrical parts with the arc-shape surface flange are formed by the DRCS.The simulation results of spun parts have good consistency with the experimental results,which verifies the feasibility of DRCS process and the reliability of the finite element model for DRCS. Compared with the conventional single-roller spinning process, the double-roller clamping spinning (DRCS) process can effectively prevent the sheet metal surface wrinkling and improve the production efficiency and the shape precision of final spun part. Based on ABAQUS / Explicit nonlinear finite element software, the finite element model of the multi-pass DRCS for the sheet metal is established, and the material model, the contact definition, the mesh generation, the loading trajectory and other key technical problems are solved. The simulations on the multi- pass DRCS of the ordinary Q235A steel cylindrical part with the arc-shaped surface flange are carried out. the effects of number of spinning passes on the production efficiency, the spinning moment, the shape error of the workpiece, and the wall thickness distribution of the final part are obtained. It is indicated definitely that with the increase of the number of spinning passes the geometrical precision of the spun part increases while the production efficiency reduces. More than that, the variations of the spinning forces and the distributions of the stresses, wall, during the multi-pass DRCS process is revealed. It is indicated that during the DRCS process the radical force is the largest, and the全形 area shows the tangential tensile strain and the radial compressive strain, while the thickness strain changes along the generatrix directions from the compressive strain on the outer edge of the flange to the tensile strain on the inner edge of the flange. -CNC6135 NC lathe, the three-axis linkage computer-controlled experimental device for DRCS which was driven by the AC servo motor is developed. And then then the experimental device, the Q235A cylindrical parts with the arc-shape surface flange are formed by the DRCS. The simulation results of spun parts have good consistency with the experimental results, which verifies the feasibility of DRCS process and the reliability of the finite element model for DRCS.