论文部分内容阅读
堆料机悬臂在回转堆料时,悬臂要根据料堆的高度随时进行变幅调整,始终保证悬臂机头和料堆有1 m 的高差,太高会导致扬尘,太低有可能导致悬臂机头和料堆相撞。刚开始堆料时,料堆很低,悬臂俯仰位于下限位,也就是悬臂工作的最低位,如果悬臂再降低,就会造成机械损坏。1 问题提出随着料堆的一层一层加高,悬臂也逐渐抬高,如果悬臂高度不变,就会出现悬臂机头和料堆相撞。当悬
Stacker cantilever swing in the stack, the cantilever according to the heap height at any time to make luffing adjustment, always ensure that the cantilever head and the heap of 1m height difference, too high will lead to dust, too low may lead to cantilever Head and material pile collision. At the beginning of the stack, the material stack is very low and the cantilever pitch is at the lower limit, which is the lowest working position of the cantilever. If the cantilever is lowered again, it will cause mechanical damage. 1 PROBLEM PROBLEMS As the pile of material increases in height, the cantilever is gradually raised. If the height of the cantilever is constant, the cantilever head collides with the material pile. When hanging