1.起动用的燃油:汽油和机油的容积比为15:1配制,并要放在清洁的容器内搅拌均匀.否则会加剧机件磨损,最容易烧损连杆轴承的滚针.2.不要在起动机工作时,按下分离机构操纵杆与主发动机飞轮结合,或者起动时用手强力按操纵杆,以免打坏齿轮.3.主发动机起动着火后,要先分离离合器,再熄火,否则会使分离过迟,造成起动机超速而易损坏机件. 1. Start with the fuel: gasoline and oil volume ratio of 15: 1 preparation, and to be placed in a clean container Stir otherwise it will aggravate mechanical wear and tear, the easiest burn roller bearing pin. Do not work in the starter, press the separation mechanism lever and the main engine flywheel combination, or start by hand strong press the joystick, so as not to damage the gear .3 main engine start the fire, the first clutch, and then turn off the fire, Otherwise it will make the separation too late, causing the starter speeding and easily damaged parts.