Traditional stabilization of backfilling material is done by using Portland cement. However, the high price of cement forced mining engineers to seek cheaper binding materials. Fly ash, which is the industrial waste from thermal power plant, possess the potential activity of jellification, and can be used in cemented fill as a partial substitute for cement to reduce the fill cost. Tests were done during the past few years in Xinqiao Pyrite Mine and Phoenix Copper Mine to determine the technology parameters and the suitable content of fly ash. Specimens with different cement/fly/ash tailings (sands) ratios were tested to obtain the strength values of the fill mass based on the analyses of both the chemical composition and physical and mechanical properties of fly ash. The compressive strength of specimens with a ratio of 1: 2: 8 (cement to fly ash to tailings)can reach 2 MPa after 90 d curing, totally meeting the requirement of artificial pillar and reducing the fill cost by 20%-30%.