取一块3mm 厚的钢板,根据灶口内壁的尺寸裁剪成正方形,钢板正中开一直径10mm小孔做为观察孔(有条件的可镶上视镜),再取一根6号钢筋,并焊在铡板的一条边上,钢筋两头各大予钢板20mm,再找两根比钢筋略粗的小圆管,套在钢板两端的钢筋头上做为门轴套,这样灶门就做好了。砌灶台时,把灶门安在加柴道里,距离炉膛等于灶门的边长,有门 Take a piece of 3mm thick steel plate, according to the size of the inner wall of the kitchen cut into square, the middle of the plate to open a small hole diameter of 10mm as observation hole (conditional can be fitted with a mirror), and then take a No. 6 steel and welding One side of the slab board, the two major steel bars to the plate 20mm, and then find two slightly thicker than the steel pipe, set in the steel ends of the steel head as a door sleeve, so the stove door is done . Stove hearth, the stove door in the increase of diesel Lane, the furnace is equal to the length of the stove door, a door