论文部分内容阅读
3.4 控制系统控制系统是种子加工流水线的重要组成部分,本加工线控制系统的全部操作均在控制柜面板上进行,控制柜面板上绘制整套设备生产线简化流程图,通过指示灯的组合反映全套设备的运行状况和加工种子时的物料流向,为了降低造价,设备启停、物料走向均由手动按钮实现;控制柜面版上设置电源总开关,以控制整个成套线的动力电源,并在运行前警铃响10～30S,以保证机器启动、人员操作时不发生意外;6台储料仓各设上下两只料位开关,主控柜上可显示其内部物料状况(有、无、满),在料满时可自动关停其前方设备,并以声(光)方式发出警报,其后方设备可继续工作;接近无料后,自动启动前方在此前被停止的设备;烘干机、计量称的电源由主控制柜提供,具体操作可在自身的控制面板上进行。
3.4 Control System The control system is an important part of the seed processing pipeline. The entire operation of the processing line control system is carried out on the panel of the control cabinet. The flow chart of the complete equipment production line is drawn on the control panel and the complete set of equipment is reflected through the combination of the indicator lights In order to reduce the cost, start and stop of the equipment, the material direction is realized by the manual button; the power switch of the control panel is set to control the power supply of the entire set of lines and the operation of the power Alarm bell ring 10 ~ 30S, to ensure that the machine starts, the operation of personnel without accidents; 6 sets of storage silos each set up and down two material level switch, the control cabinet can display the internal material status (yes, no, full) When the material is full, it can automatically shut down its front equipment, and sound (light) way to issue an alarm, the rear of the equipment can continue to work; close to no material, automatically start the front of the previously stopped equipment; dryer, weighing The power supply provided by the main control cabinet, the specific operation can be carried out in its own control panel.