装配气缸套一法先将更换的新阻水田装入气缸套下部的圆周槽中，并在阻水田表面涂上一层油漆，之后用手将缸套压入机体中。如缸套与安装孔配合较紧，可用手锤柄沿气缸套边沿轻轻敲击数次，但要注意不能使阻水田变形。然后找两个与所修机地相同的旧活塞销，按对角线方向分别... One method of assembling a cylinder liner First, replace the new paddy field into the circumferential groove in the lower part of the cylinder liner, apply a layer of paint on the surface of the paddy field, and press the cylinder liner into the body by hand. Such as cylinder liner and mounting hole with tighter, hand hammer handle along the edge of cylinder liner gently tap several times, but be careful not to deformation of the deformation field. Then look for two old piston pins that are the same as those you repaired, diagonally ...