Deep-red emitting Mg2TiO4:Mn4+ phosphor ceramics for plant lighting

来源 :先进陶瓷(英文版) | 被引量 : 0次 | 上传用户:aj810130
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this study, deep-red emitting Mg2TiO4:Mn4+ phosphor ceramics were synthesized by thehigh temperature solid-state reaction method. The ceramics can be excited by the 465 nm blue light and had a narrow emission with a full width at half maximum (FWMH) value of 31 nm. The peak wavelength was located at 658 nm, which matched the demanded wavelength for photosynthesis. The crystal field strength (Dq) and the Racah parameters (B and C) were estimated by the Tanabe–Sugano diagram. The thermal conductivity of the Mg2Ti(0.999)O4:0.001Mn4+ ceramic was 7.535 W/(m·K) at room temperature, which was one order of magnitude higher than that of the traditional packaging method using the silicone gel. A set of phosphor converted LEDs were fabricated by mounting the phosphor ceramics onto the 460 nm blue LED chips and the CIE coordinates can move from the blue region to the purple light region with the thickness of the ceramic increasing. These results indicated that the Mg2TiO4:Mn4+ phosphor ceramic was suitable for plant lighting when combined with a blue LED chip.
其他文献
建立气相色谱-质谱联用快速测定玩具及儿童用品中苯并[c]芴、苯并[b]萘并[2,1-d]噻吩、5-甲基䓛和二苯并[cd,jk]芘4种多环芳烃的方法。结果表明,采用甲苯为萃取溶剂,超声波萃取50 min,采用DB-EUPAH毛细管色谱柱,选择离子监测模式下定量分析,可实现4种多环芳烃的有效分离。该方法的4种多环芳烃质量浓度测定线性范围为0.01~1 mg·L-1,线性相关因数不小于0.9992,加标回收率为86.5%~108.7%,相对标准偏差小于3%,可用于玩具及儿童用品中4种多环芳
介绍一带一路项目乌兹别克斯坦安格连橡胶厂建设的公用工程系统设计优化.为进一步控制成本、便于实施、使设备操作和维护更加便利,提出锅炉房除氧器溢流管增加水封、锅炉房凝
研究白炭黑、石蜡油、吸水树脂和吸水助剂ZA用量对三元乙丙橡胶吸水膨胀橡胶性能的影响.结果表明:在使用石蜡油改善胶料加工性能时,需要加入20份以上的白炭黑,否则硫化胶难以
In this work, three-dimensional (3D) Cf/SiBCN composites were fabricated by polymer infiltration and pyrolysis (PIP) with poly(methylvinyl)borosilazane as SiBCN
氟橡胶具有优异的耐化学腐蚀和耐高温性能,在航空航天、机械、石油、汽车和军工等领域广泛应用,减小氟橡胶摩擦因数和磨耗量不但能够延长其密封制品使用寿命,还能够提高生产
Three-dimensional (3D) printing technology is becoming a promising method for fabricating highly complex ceramics owing to the arbitrary design and the infinite
A glycine–nitrate self-propagating high-temperature synthesis (SHS) was developed to produce composite MgO–Gd2O3 nanopowders. The X-ray powder diffraction (XR
The resistive switching (RS) mechanism of hybrid organic–inorganic perovskites has not been clearly understood until now. A switchable diode-like RS behavior i
简要回顾建模仿真技术的发展与演变历程,及其在科技进步中所发挥的重要作用。通过数字孪生产生的背景及内涵,揭示其与建模仿真一脉相承的关系。探讨如何借鉴建模仿真理论方法进行数字孪生的构建和评估,从而保证数字孪生的可信。
High performance hydroxyapatite (HA) ceramics with excellent densification and mechanical properties were successfully fabricated by digital light processing (D