论文部分内容阅读
机械部件引起功能混乱的主要部位是功能滑片组件,检查时应逐次进行观察,看驱动板是否断裂,导致上下两片不能一起动作,造成按下的功能选择柱发生错误,使功能滑动动作错乱。这种情况往往使机器故障无准确规律,有时可能功能准确、有时混乱。此时可将整个功能传递组件一起取下,再拆下功能滑片组件,更换驱动板。更换时注意不可把滑片和驱动板位置与滑动轨道错位。另外,要将驱动板下面的柱放在主电磁铁
Mechanical components caused by chaos is the main part of the functional vane assembly, the inspection should be observed one by one, to see if the drive plate is broken, resulting in the upper and lower two can not be together, resulting in pressed function selection column error occurs, so that functional sliding misconfigured . This situation tends to make the machine failure is not accurate law, and sometimes may be functional and sometimes confusion. In this case, the entire function transmission assembly can be removed together, and then the function slide assembly is removed to replace the drive plate. Do not replace the slide and the drive plate position and sliding track misalignment. Also, place the column under the driver board on the main electromagnet