论文部分内容阅读
近幾年來,可以看到机械另件的液体磨料噴炼法在技術上和应用範圍上都有了很快的發展。这个方法可以有效地用來清除机械加工表面上所留下的刀痕和毛刺。如用在精製压模方面,则可作为表面鍍鉻前的預加工。这种加工方法除了可从另件表面清除金屬氧化物或化合物、脱碳层,和其他的污物外,同時还可像铁砂噴煉法一样得到所謂表面冷作硬化。由此,应用液体磨料噴煉法,得到了很高的表面質量。这种表面能保証具有很高的耐疲性能,並且在表面层中產生殘留的压縮应力;因此这种方法可用在精密机構中强力彈簧的最後加工。液体磨料噴练法可有效地用來消除某些缺陷,
In recent years, you can see the mechanical parts of the liquid abrasive spray method in the technical and application areas have been rapid development. This method can be effectively used to remove marks and burrs left on machined surfaces. As used in the refining die, it can be used as a pre-chrome surface treatment. In addition to removing metal oxides or compounds, decarburized layers, and other contaminants from the surface of the parts, this process also gives the so-called surface cold work-hardening, the same as the iron blasting process. Thus, the application of liquid abrasive blasting method, has been very high surface quality. This surface ensures high resistance to fatigue and creates residual compressive stresses in the surface layer; this method can therefore be used in the final machining of strong springs in precision mechanisms. Liquid abrasive spray method can effectively be used to eliminate some defects,