五十铃车驾驶室若被撞变形,按传统维修程序需拆除仪表板、刮水器拉杆等许多零部件后才能进行整形作业,很不方便。其实,用铁丝和手动葫芦就能对驾驶室进行整形。具体方法如下: a.用手电钻在驾驶室最大变形处钻2个直径约φ4mm的孔(两孔中心距以受力均匀、驾驶室铁皮不会被拉断为宜); Isuzu car crash if the cabin was deformed, according to the traditional maintenance procedures need to dismantle the dashboard, wiper rod and many other components to carry out plastic surgery, very inconvenient. In fact, with the wire and hand hoist will be able to shape the cab. Specific methods are as follows: a. Drill drill in the maximum deformation of the cab drill 2 holes of about φ4mm diameter (two hole center distance to force evenly, cab metal will not be pulled off appropriate);