Efficient cuttings transport and improving rate of penetration(ROP)are two major challenges in horizontal drilling and extended reach drilling.A type of jet mill bit(JMB)may provide an opportunity to catch the two birds with one stone:not only enhancing cuttings transport efficiency but also improving ROP by depressuring at the bottom hole.In this paper,the JMB is further improved and a new type of depressure-dominated JMB is presented;meanwhile,the depressurization capacity of the depressure-dominated JMB is investigated by numerical simulation and experiment.The numerical study shows that low flow-rate ratio helps to enhance the depressurization capacity of the depressure-dominated JMB;for both depressurization and bottom hole cleaning concern,the flow-rate ratio is suggested to be set at approximately 1:1.With all other parameter values being constant,lower dimensionless nozzle-to-throat-area ratio may result in higher depressuriza-tion capacity and better bottom hole cleaning,and the optimal dimensionless nozzle-to-throat-area ratio is at approximately 0.15.Experiments also indicate that reducing the dimensionless flow-rate ratio may help to increase the depressurization capacity of the depressure-dominated JMB.This work provides drilling engineers with a promising tool to improve ROP.