Tunable terahertz filter based on alternative liquid crystal layers and metallic slats

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:dianshenshizhe
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We propose and demonstrate a pseudo Fabry–Pérot filter in the terahertz frequency range of 0.1–0.5 THz. It consists of alternative liquid crystal layers and metallic slats. Separate sharp resonant peaks are shown in the simulated transmission spectra, and their positions shift toward higher frequencies when the refractive index of liquid crystal decreases. The measured transmission spectra are consistent with corresponding simulations. Via thermally tuning the refractive index of the filled liquid crystal, the resonant transmission frequencies shift accordingly. The work supplies a novel design for tunable terahertz filters, which would play important roles in terahertz imaging, sensing, high speed communication, and security applications.
其他文献
为了使降维结果更好地体现高光谱数据的空间结构信息,并进一步提高分类精度,提出了一种基于线性嵌入和张量流形的高光谱特征提取算法。不同于其他流形结构的表达方法,所提算法采用协同表示理论求解全局线性嵌入的权重矩阵,更有利于保持高维数据的全局信息,提高了流形结构表达的准确性。同时,建立了基于多特征描述的张量流形降维框架,得到的显式映射具有较强的可靠性和全局适应性。实验结果表明:与主成分分析、局部线性嵌入、
通过化学水浴法生长了铯掺杂ZnO纳米柱阵列(CZO-NRA),将其作为电子传输层(ETL),利用乙醇胺与二甲氧基乙醇共混溶液对CZO-NRA进行表面修饰,制备了倒置聚合物太阳能电池。研究结果表明,适量的铯掺杂提高了纳米柱的c轴择优取向结晶度,减少了ETL中由氧空位和锌填隙原子引起的深能级缺陷,减小了器件的串联电阻,增大了器件的短路电流与填充因子。表面修饰减少了CZO-NRA的表面缺陷,减小了ETL与有源层的接触电阻,抑制了界面载流子复合。与未掺杂的器件相比,表面修饰CZO-NRA器件的能量转换效率由1.2
精密光学系统及精密机械系统属于最昂贵的设备。60年代初期出现了适于广泛应用的激光光源。为满足市场需要,必须提供简单、廉价而可靠的光学系统,以便与激光光源结合使用。当时开始研制小型光学系统,企图用以取代由分离组件组成的笨重而昂贵的光学系统。贝耳实验室研究组于1965年获得首次成功,他们提出利用薄膜与光刻术制造不同光波导器件的方案。这个领域到1969年才得以发展。
期刊
Accurate time transfer and synchronization between different network nodes is a key functional requirement in digital communication. Developments in optical fiber-based frequency dissemination techniques have improved optical frequency stability over time
期刊
Al2O3 films are deposited using ion beam sputtering (IBS), ion beam reactive sputtering (IBRS), and electron beam evaporation (EBE). The properties of the films, such as optical identity, surface roughness, microstructures, and crystalline phase, are inve
期刊
提出了以信息损失最少为原则的三值(±1)互连权重编码方法,这种编码方法比以前的三值权重编码方法显著地提高了神经网络的性能。由于互连权重只有三值,恰恰弥补了光互连精度不高的缺点,易于光学实现。
The nonlinear optical loop mirror (NOLM) is used as a saturable absorbed to reshape pulses. Experimentally, an actively mode-locked erbium-doped fiber ring laser with figure-eight structure is set up. 2 ─ 4 order harmonic pulse train with stable amplitude
为了更深层次探究超短脉冲激光对惯性约束聚变(ICF)光学系统中常见的多膜层元件损伤修复性能以及特点,分别采用了240、35、6 ps的1053 nm激光脉冲在1053 nm 0°高反膜上进行了损伤修复以及损伤增长测试实验,并在1053 nm 45°高反膜上进行了大损伤区域的扫描修复实验。通过比较不同脉宽的修复点形貌以及损伤增长阈值,说明了超短脉冲用于修复多膜层光学元件损伤的优越性,并且脉宽越短修复效果越好。多点脉冲扫描修复结果表明,可以通过三维控制系统来任意控制扫描修复点形貌以达到最佳修复状态。