【摘 要】
：
In order to evaluate the degree and severity of Al-Mg-Mn-Sc-Zr alloy in exfoliation corrosion(EXCO) solution quickly and nondestructively, electrochemical imped
【机 构】
：
School of Physics Science and Technology, School of Materials Science and Engineering
论文部分内容阅读
In order to evaluate the degree and severity of Al-Mg-Mn-Sc-Zr alloy in exfoliation corrosion(EXCO) solution quickly and nondestructively, electrochemical impedance spectroscopy(EIS) technique was employed. The Al-Mg-Mn-Sc-Zr alloy suffers pitting corrosion in the EXCO solution. During pit incubation, the Nyquist diagram is composed of a depressed capacitive arc at high-mediate frequency and an inductive arc at low frequency. The inductive arc fades with immersion time, and the beginning of pitting corrosion and the appearance of two capacitive arcs have simultaneity. During pit propagation, the Nyquist diagram is composed of two overlapped capacitive arcs. As time goes on, two time constants are more clearly distinguished. The high frequency and low frequency capacitive arc are aroused by passive surface and new interface, respectively. An equivalent circuit is designed to fit EIS, and the experimental results and the fitted results have good correspondence. The degree and severity of pitting corrosion can be obtained by the features of EIS and comparing the fitted values of parameters at different times.
其他文献
A new group signature with one time secret key is proposed. The main merits are that it only needs the trusted center issuing the partial secret key one time fo
The closed-died cold forging technology of the bevel gears used in Jada car was investigated. With the analysis of the strain field and velocity field of the pl
Traditional generating algorithms for B Spline curves and surfaces require approximation methods where how to increment the parameter to get the best approximat
Prediction of melt index (MI), the most important parameter in determining the products grade and quality control of polypropylene produced in practical industr
A series of Co/Si/(Co/Cu/Co) multilayers and Co/Si/Co sandwiches were prepared by high vacuum electron-beam evaporation. It was found that a Si spacer (≥0.9nm)
Distributed inverted index technology is used in many peer-to-peer (P2P) systems to help find rapidly document in -set search system for peer-to-peer networkswh
Datapath accounts for a considerable part of power consumption in VLSI circuit design. This paper presents a method for physical implementation of datapath to a
The conjugation of semi-solid process technique and casting-rolling technique applied to produce the magnesium strips was studied. The semi-solid slurry hasbeen
By adopting an equivalent geometry model of machining process and considering thermo-plastic properties of the work material, a finite element method(FEM) to st
Nanostructured (NS) W-Cu composite powder was prepared by mechanical alloying (MA), and nanostructured bulk of W-Cu contact material was fabricated by hot press