论文部分内容阅读
The squeeze-casting method is utilized to synthesize ZL109/Al2O3·SiO2 particle reinforced composites with 5%,10%,20%,30%(volume fraction) Al2O3·SiO2 particles,respectively. The microstructures and mechanical behaviors of ZL109/Al2O3·SiO2 particle reinforced composites were studied,and the mechanical properties were tested. The results show that Al2O3·SiO2 particles can be homogeneously distributed on the aluminum matrix in this process. The hardnesses of the composites are higher than that of the Al matrix,and increases with increasing the volume fraction of Al2O3·SiO2 particles. The tensile strengths and elongations of the composites are lower than that of the Al matrix,and decrease with increasing the volume fraction of Al2O3·SiO2 particles. The fracture characteristics of the composites has an obvious change with increasing the volume fraction of Al2O3·SiO2 particles on the fracture section,the toughness dens become smaller and shallower,and the tearing ridges and “rivers” pattern appear. The fracture characteristics of the composites become fragile from ductile with the increase of the volume fraction of Al2O3·SiO2 particles. Elastic moduli of the composites have little change compared with the Al matrix.
The squeeze-casting method is utilized to synthesize ZL109 / Al2O3 · SiO2 particle reinforced composites with 5%, 10%, 20%, 30% by volume Al2O3 · SiO2 particles, respectively. The microstructures and mechanical behaviors of ZL109 / The results show that Al2O3 · SiO2 particles can be homogeneously distributed on the aluminum matrix in this process. The hardnesses of the composites are higher than that of the Al matrix, and increases with increasing the volume fraction of Al2O3 · SiO2 particles. The tensile strengths and elongations of the composites are lower than that of the Al matrix, and decreasing with increasing the volume fraction of Al2O3 · SiO2 particles. The fracture characteristics of the composites has an obvious change with increasing the volume fraction of Al2O3 · SiO2 particles on the fracture section, the toughness of the smaller and shallower, and the tearing ridges and “rivers” pattern appear. The fracture characteristics of the composites become fragile from ductile with the increase of the volume fraction of Al2O3 · SiO2 particles. Elastic moduli of the composites have little change compared with the Al matrix.