论文部分内容阅读
联合收割机结构复杂,价格昂贵,而使用时间短,闲置时间长,因此对收割机作业后的保养和正确保管愈显重要。机手在作业后应做好以下几方面的工作。1.在收割作业结束后,应清除机上的泥土、杂物,并用水冲洗一遍,晾干后把收割机开进机库(或车棚)内停好。2.用方木将联合收割机垫起,使前后轮离地;把割台、拨禾轮降至最低位置并垫以木块,使柱塞完全缩入缸体(其它部位的液压油缸也应如此),液压系统内不受负荷;卸掉安全离合器部位弹簧的负荷,以防弹簧疲劳。
Combine harvester is complex, expensive, and the use of time is short, idle for a long time, so after harvester operation and maintenance of the correct and more important. After the operation of the hands should do a good job in the following areas. 1. At the end of the harvesting operation, the soil and debris on the machine should be removed and rinsed again. After drying, the harvester should be parked inside the hangar (or carport). (2) paddles with combine harvester, the front and rear wheels off the ground; the header, reel down to the lowest position and padded with wood, the plunger fully retracted into the cylinder (other parts of the hydraulic cylinder Should be so), the hydraulic system is not loaded; remove the safety clutch spring load, to prevent spring fatigue.