Influence of Rheological Active Additives on the Properties of Self- compacting Concrete

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:wyzhen
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The effect of rheological-active additives on the properties of cement suspensions and self-compacting concrete mixtures have been studied. In order to increase the rheological matrix and provide high fluidity, stone powders were used during the crushing of local mountain rocks in self-compacting concrete. Taking into account the high dispersion of rheological-active additives, highly effective plasticizers were used to regulate the reotechnological properties of cement-based mixtures. The effect of sulfonaphthalen-formaldehyde oligomer and polycarboxylate-based hyperplasticizer on rheological properties of cement systems as plasticized additive on methodology proposed by V Kalashnikov was evaluated.The flow rate of cement suspension is determined by means of mini-viscosimeter, spreading of cement-sand mortar by means of Hegermann cone, and the slump of concrete mixture by means of Abraham's cone. On the basis of obtained results, it was determined that limestone powder was more efficient than other stone powders. Thus, when adding 40% limestone powder to the mixture, the compressive strength of the samples taken from self-compacting concrete mixture increases by 15%-30% compared to the control samples. The optimal quantities of rheological-active additives and plasticizers have been identified and the possibility of obtaining high-strength self-compacting concrete based on them has been confirmed.
其他文献
The stress corrosion cracking (SCC) behaviors of 2A12 aluminum alloy after annealing treatment were studied by slow strain rate testing (SSRT), electrochemical
战略合作广东联通携手格力和华为完成国内首个制造领域5G端到端硬切片上线近日,广东联通携手格力电器、华为,在珠海格力电器总部开展了"5G硬切片"专网改造项目,完成并测试成功国内首个智能制造领域5G端到端硬切片专网,标志着5G网络切片正式在智能制造领域展开应用。下一步,项目组将会进一步扩大产线业务规模验证,基于MEC边缘云平台+5G切片技术,牵引更多智慧工业能力的部署。
期刊
The porous structure and honeycombed structure of granulated blast furnace slag formed by alkali activation (AGBFS) can be used as a promising photocatalysts su
The 60Fc and 70Fc SF/SA blend scaffolds were prepared to mimic the functions of the native ECM for skin regeneration. Human Umbilical Vein Endothelial Cells (HU
Hierarchical porous carbon material (MMC) was successfully fabricated via hard template synthesis method by carbonization of furfury alcohol within the template
Plasma electrolytic oxidation (PEO) coatings were formed on 7075 aluminum alloy in silicate-borate based electrolyte with different duty cycles. The physical an
Phlogopite-based geopolymer was first prepared successfully under the activation of lye by compression molding at 50 MPa for 1 minute. The geopolymer was endowe
The hot tensile deformation properties and microstructure evolution of high purity C71500 cupronickel alloy at 1023-1273 K and 0.0001-0.1 s-1 strain rates were
The strength and microstructural analysis of recycled geopolymer are presented in this paper. Five kinds of geopolymers containing 0%, 20%, 50%, 80% and 100 % of rec
白光有机电致发光器件(OLED)在实际应用中根据不同的应用场景而有不同的色温要求。该白光OLED具有串联混合结构,包括荧光蓝光发射单元和以Pt磷光材料为客体的黄光发光单元。利用串联器件中存在的弱微腔效应以及所用Pt磷光材料的掺杂特性,通过改变串联结构中空穴传输层的厚度、电荷产生层中n型结构的厚度、调整Pt磷光客体材料在黄光发光单元中的质量分数对串联白光OLED色温进行了调整。通过以上方法,白光OLED的色温可以在3000~10000 K内进行调整,以满足不同的实际应用需求。