论文部分内容阅读
家用洗衣机波轮等部位漏水是一种较为常见的故障。造成这种漏水故障的原因是多方面的,现将主要原因及排除方法分别介绍如下: 1.主轴(渡轮轴)的轴套螺帽松动,或者橡胶垫圈老化、损坏,密封不良而造成漏水,可根据检查情况,紧固主轴套螺帽或更换新的橡胶垫圈。 2.渡轮轴上的橡胶密封圈(俗称水封)因磨损而造成漏水,检修时先拆下波轮,取出已磨损的旧水封,然后换上新的水封,并涂上润滑油,安装妥当。应当注意:
Washing machine parts such as domestic water leakage is a more common fault. The cause of such a water leakage fault is manifold, and the main causes and remedies are respectively as follows: 1. The shaft nut of the spindle (ferry shaft) is loose or the rubber gasket is aged, damaged or badly sealed, causing water leakage, According to the inspection, tighten the spindle nut or replace the new rubber washer. 2. The ferrous rubber seal on the shaft of the ferry (commonly known as water seal) is leaking due to abrasion. During the inspection, the pulsator is disassembled first, the worn old seal is taken out, the seal is replaced with a new seal, lubricated, Installed properly. It should be noted: