论文部分内容阅读
The amorphous Fe 67.5 Ni 32.5 alloy particles have been prepared by mechanical alloying (MA) process of elemental powders. The crystallization is observed at temperature around 405°C by means of differential thermal analyzer. It is found that the coercivity H C and the effective magnetic anisotropy value of amorphous phase are not far from that of crystal phase. The magnetization behavior of amorphous and nanocrystalline samples prepared by mechanical alloying and milling process are quite similar, they obey 1/H law at middle high field and 1/H 2 at higher field. The 1/H field dependence is attributed to a large number of dislocations created during MA process. The studies on the 1/H 2 field dependence reveals that magnetization of Fe Ni ultrafine particles are governed predominantly by internal stress fields induced by MA process.
The amorphous Fe 67.5 Ni 32.5 alloy particles have been prepared by mechanical alloying (MA) process of elemental powders. The crystallization is observed at temperature around 405 ° C by means of differential thermal analyzer. It is found that the coercivity HC and the effective magnetic The magnetization behavior of amorphous and nanocrystalline samples prepared by mechanical alloying and milling processes are quite similar, they obey 1 / H law at middle high field and 1 / H 2 at higher The 1 / H field dependence is attributed to a large number of dislocations created during MA process. The studies on the 1 / H 2 field dependence reveals that magnetization of Fe Ni ultrafine particles are governed predominantly by internal stress fields induced by MA process .