论文部分内容阅读
山推TY320型履带式推土机作业工况恶劣,转向、制动系统操作频繁,容易因磨损发生故障,此类故障可通过适当调整予以排除。1.调整转向离合器摩擦片间隙在转向离合器使用过程中,常因其摩擦片磨损、分离机构锁紧螺母松动及压紧弹簧弹性降低造成离合器打滑,无法正常传递动力,导致转向困难甚至失灵。此时需要对转向离合器摩擦片间隙进行调整,方可使其恢复正常工作。具体方法如下:打开转向离合器壳体上的检视盖,松开转向离合器分离机构端部球面螺栓外面的锁紧螺母,使转向离合器分离叉放松,转向离合器的摩擦
TY320 crawler bulldozers push the bad working conditions, steering, braking system operating frequently, prone to wear and tear failure, such failures can be adjusted by appropriate to be ruled out. 1. To adjust the steering clutch friction plate gap In the steering clutch during use, often due to its friction plate wear and tear, the separation mechanism lock nut loose compression spring and elastic reduction caused by clutch slip, unable to pass the power, resulting in steering difficulties or even failure. At this point, the steering clutch friction plate clearance needs to be adjusted before it can resume normal operation. The specific methods are as follows: Open the steering cover on the cover, release the steering clutch release mechanism outside the spherical stud nut, so that the steering clutch release fork to clutch the friction