论文部分内容阅读
下面介绍的一种简易、快速、不受空间限制、按相似三角形原理研制的模拟式机泵找正器如图1所示,其专利号为91221254.3。活动表架4套装在固定表架1中,并用销轴与固定表架铰接。调节微调机构5,从活动表架3的摆动,即模拟原动机的抬高或降低。原动机前后支脚加减垫片的厚度由表Ⅲ,Ⅳ确定。使用步骤为:(1)按通常的双表法找正装好表架,并锁紧件5对机泵初步找正。(2)置表架于联轴器下方并调节表Ⅰ,Ⅱ的指针为0。(3)盘车
The following describes a simple, fast, without space constraints, developed by the analogy principle of similar triangles analogue pump as shown in Figure 1, the patent No. 91221254.3. The movable watch holder 4 is assembled in the fixed watch holder 1 and hinged with the fixed watch holder by the pin. Adjust the fine adjustment mechanism 5, from the activities of the table 3 swing, that is, to simulate the prime mover elevation or lower. Before and after the prime mover feet plus and minus the thickness of the gasket from Table Ⅲ, Ⅳ to determine. The use of steps: (1) according to the usual two-table method to find a good place to install the watch holder, and lock the initial correction of the pump 5. (2) Set the watch holder below the coupling and adjust the hands of the watch I, II to zero. (3) crank