论文部分内容阅读
一、试验目的 在烧结配料中加入5％左右的消石灰,10～15％的高硅庞家堡富矿的“双强化措施”,经过鞍钢烧结工业试验结果表明,可以提高烧结矿产量和质量。但包钢的具体生产工艺、操作、设备与鞍钢有所不同,在包钢具体条件下,还应进一步验证该措施的可靠性并通过试验,总结出双强化措施的产、质量指标和技术操作数据,为近几年的烧结正常生产提供依据,也使生产中的工艺技术操作在现有基础上提高一步,为包钢大干快上,打好原料翻身仗,提供一定的条件。因此,在冶金部及内蒙工作组支持下,公司组织有关单位,以烧结厂为主,进行了这次试验。参加这次试验的有北京钢铁学院,北京钢铁研究院炼铁室,包钢中央试验室、包钢科技处、生产处、质量处等单位。
First, the purpose of the trial In the sintering ingredients by adding about 5% of the slaked lime, 10 ~ 15% of the high-silicon Pang Jiabao rich ore “double-enhanced measures”, after the Ansteel sintering industry test results show that you can increase the sinter yield and quality. However, the specific production process, operation and equipment of Baotou Steel are different from that of Ansteel. Under the specific conditions of Baotou Steel, the reliability of this measure should be further verified and the production, quality indexes and technical operation of the double strengthening measures should be concluded Data, in order to provide the basis for the normal production of sintering in recent years, but also to improve the production process technology operation based on the existing basis for the Baotou Dafan fast, lay the battlefield to provide raw materials, to provide certain conditions. Therefore, with the support of the Ministry of Metallurgy and the Inner Mongolia Working Group, the company organized the unit concerned with the sinter plant and conducted the experiment. To participate in this trial, Beijing Iron and Steel Institute, Beijing Iron and Steel Research Institute Iron and Steel, Baotou Steel Central Laboratory, Baotou Steel Technology, Production, Quality Department and other units.