A new numerical approach of coupled modeling for solid deformation and gas leak flow in multi-coal-s

来源 :煤炭学报(英文版) | 被引量 : 0次 | 上传用户:zhuhai2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
From the viewpoint of interaction mechanics for solid and gas, a coupled mathematical model was presented for solid coal/rock deformation and gas leak flow in parallel deformable coal seams. Numerical solutions using the SIP (Strong Implicit Procedure) method to the coupled mathematical model for double parallel coal seams were also developed in detail. Numerical simulations for the prediction of the safety range using protection layer mining were performed with experimental data from a mine with potential danger of coal/gas outbursts. Analyses show that the numerical simulation results are consistent with the measured data in situ.
其他文献
According to the geological and mining technical conditions of No.18128 sublevel caving face with suspend-shift support,the first working face of the working area,the distribution laws of abutment pressure were studied by jointly employing FIAC3D numerica
This paper deals with the real-time computerized tomography(CT) test for monitoring the complete damage failure process of a single-crack granite specimen that is subjected to the confining pressure unloading. For this purpose, the State Key Laboratory of
There are sulfate and chloride ions corrosion and carbonation to concrete in coal mine. Based on taking test of accelerated carbonation, corrosion of 3.5% weight of NaCl solution and 5% weight of Na2SO4 solution of coal mine concretes, durability of concr
Taking the deep cutting excavation of Beijing-Qinhuangdao expressway as an example, the paper utilizes DYNA-2D dynamic FEM procedure to simulate the rock blasting process. The computation model was based on dynamical response of nonlinear elasto-plasticit
Used numerical simulation method to study the floor water-inrush mechanism in working face which was influenced by fault structure, and set up many kinds of models and performs numerical calculation by fully using large finite element soft-ANSYS and eleme
The working conditions of the MK-3 type full hydraulic tunnel drilling machine during the course of drilling were analyzed. Based on the energy balance governing equations for the drill rod, the temperature field of drill rod at the normal and non-normal
Presented field-circuit coupled adaptive time-stepping finite element method to study on permanent magnet linear synchronous motor (PMLSM) characteristics fed by SPWM voltage source inverter. In air-gap field where the direction or magnitude of the field
The main objective of the present study was introduced water mist suppression technologyto prevent and control gas burning which occurred during drilling at Wu20160 working-face in No.10 coal mine of Pingdingshan Ltd.. Based on the self-developed experime
Based on mechanism of AE creation, put forward sphere cavity model, and deduced wave Equation of AE wave radiated by the AE source in detail, and analyzed the propagation attenuation law of AE stress wave in coal (rock) strata. Displacement function of AE