论文部分内容阅读
随着生产的不断发展,拉丝机的拉拔速度越来越高。为了减少拉丝机的停车卸线时间,提高拉丝机的作业率,以及减少由于卷筒的积线量而引起的惯性力,以利更进一步提高拉拔速度,因此在拉丝机的后面应配备有自动卸线装置或工字轮下线装置。下面介绍一种由东德引进的UDS1000/1工字轮下线机。该机采用机械传动,并用液压来进行排线,可绕钢丝直径为1.2~8毫米,工字轮尺寸为φ420×φ820×500毫米,收线重量:钢丝1000公斤,铜丝1150公斤,铝丝350公斤,收线速度为0.66~4米/秒。
With the continuous development of production, wire drawing machine drawing speed higher and higher. In order to reduce the wire drawing machine parking off line time to improve the wire drawing machine operating rate and reduce the amount of inertia due to the product of the volume of the reel in order to further improve the drawing speed and therefore in the drawing machine should be equipped with a Automatic unloading device or I-line off device. The following describes a UDS1000 / 1 imported from the East German word round off the machine. The machine uses mechanical transmission, and hydraulic cable, can be around the wire diameter of 1.2 to 8 mm, I-shaped wheel size φ420 × φ820 × 500 mm, take-up weight: 1000 kg of wire, copper wire 1150 kg, aluminum wire 350 kg, closing speed of 0.66 ~ 4 m / s.