论文部分内容阅读
蒸汽接种操作虽方便,但成品率不高.用接种箱接种箱体容积小,操作不方便.笔者经过多次试验,采用横简式塑料棚接种,效果很理想.现介绍如下:1 制作与使用 取宽1.5～2m、长2～3m、厚4～5dm透明度高的聚乙烯简膜,在中间的一侧挖2个直径15cm孔,孔间距50cm,用长30cm、宽15cm的聚丙烯袋筒的一端放入圆孔内,小筒袋和圆孔间隙内外用胶带纸粘合密封好,再在小袋筒的末端套上一个环形松紧绳圈,用胶带纸把它固定住,2个小袋筒和接种箱上
Steam inoculation operation is convenient, but the yield is not high. Inoculation box vaccination box volume is small, the operation is not convenient. The author after many tests, the use of horizontal-type plastic shed inoculation, the effect is very satisfactory. Using a polyethylene film with a width of 1.5 to 2 m, a length of 2 to 3 m and a thickness of 4 to 5 dm and high transparency, two holes of 15 cm in diameter and 50 cm in diameter were dug in one side of the middle and covered with polypropylene bags of 30 cm in length and 15 cm in width One end of the tube is placed in the circular hole, the inner and the outer of the small cylinder bag and the circular hole are glued and sealed with tape and paper, and then an annular elastic ring is put on the end of the small tube and fixed with tape, two pouches Tube and inoculation box