论文部分内容阅读
The relationship between the secondary carbide precipitation and transformation of the 3Cr15Mo1V1.5 white iron and abrasion resistance was investigated by using optical microscope (OM), transmission electron microscopy (TEM) and X-ray diffrac- tion (XRD). The results show that the properties of secondary carbides precipitated at holding stage play an important role in the abrasion resistance. After certain holding time at 833 K subcritical treatment, the grainy (Fe, Cr)23C6 carbide precipitated and the fresh martensite transformed at the holding stage for 3Cr15Mo1V1.5 white iron improve the bulk hardness and abrasion resistance of the alloy. Prolonging holding time, MoC and (Cr, V)2C precipitations cause the secondary hardening peak and the corresponding better abrasion resistance. Finally, granular (Fe, Cr)23C6 carbide in situ transforms into laminar M3C carbide and the matrix structure transforms into pearlitic matrix. These changes weaken hardness and abrasion resistance of the alloy sharply.
The relationship between the secondary carbide precipitation and transformation of the 3Cr15Mo1V1.5 white iron and abrasion resistance was investigated by using optical microscope (OM), transmission electron microscopy (TEM) and X-ray diffractiometry (XRD). The results show that the properties of the secondary carbides precipitated at holding stage play an important role in the abrasion resistance. After certain holding time at 833 K subcritical treatment, the grainy (Fe, Cr) 23C6 carbide precipitated and the fresh martensite transformed at the holding stage for 3Cr15Mo1V1. 5 white iron improve the bulk hardness and abrasion resistance of the alloy. Prolonging holding time, MoC and (Cr, V) 2C precipitations cause the secondary hardening peak and the corresponding better abrasion resistance. situ transforms into laminar M3C carbide and the matrix structure transforms into pearlitic matrix. These changes weaken hardness and abrasion resistance of the allo y sharply.