【摘 要】
：
We report on the enhancement of phase conjugation degenerate four-wave mixing (DFWM) in hot atomic Rb vapor by using a Bessel beam as the probe beam. The Bessel beam was generated using cross-phase modulation based on the thermal nonlinear optical effect.
【机 构】
：
StateKeyLaboratoryIncubationBaseofPhotoelectricTechnologyandFunctionalMaterials,NationalPhotoelectri
【出 处】
：
PhotonicsResearch
论文部分内容阅读
We report on the enhancement of phase conjugation degenerate four-wave mixing (DFWM) in hot atomic Rb vapor by using a Bessel beam as the probe beam. The Bessel beam was generated using cross-phase modulation based on the thermal nonlinear optical effect. Our results demonstrated that the DFWM signal generated by the Bessel beam is about twice as large as that generated by the Gaussian beam, which can be attributed to the extended depth and tight focusing features of the Bessel beam. We also found that a DFWM signal with reasonable intensity can be detected even when the Bessel beam encounters an obstruction on its way, thanks to the self-healing property of the Bessel beam. This work not only indicates that DFWM using a Bessel beam would be of great potential in the fields of high-fidelity communication, adaptive optics, and so on, but also suggests that a Bessel beam would be of significance to enhance the nonlinear process, especially in thick and scattering media.
其他文献
A silicon-on-insulator-based adiabatic waveguide taper with a high coupling efficiency and small footprint is presented. The taper was designed to reduce the incidence of mode conversion to higher-order and radiation modes inside the waveguide. In connect
600千电子伏电子的3毫微秒脉冲已用来电离CO2-N1-He介质，获得了持续时间达120微秒的激光脉沖。电子束几乎与激光器轴共轴，与维持场垂直。从75厘米长器件中荻得了11.5焦耳的能量。
A new design of shallow-etched multilayer dielectric grating (MDG) exhibiting a diffraction efficiency (DE) of approximately 100% in the –1st order at 1064-nm wavelength in Littrow mounting is reported. Particle swarm optimization algorithm and Fourier mo
为了设计出高功率、高光束质量的激光器，研究激光器的光束质量随腔内光学元件间的距离、孔径尺寸等的变化具有重要的意义。在考虑棒端平面的热膨胀的情况下，用光学传输矩阵方法研究了双棒对称腔中双棒之间的距离对激光器稳定性和光束质量的影响。数值计算了在没有热致双折射补偿和有热致双折射补偿时光束质量、棒中基模体积、模形状与棒温差和双棒间距离的关系。结果表明，在热致双折射补偿腔中，为得到好的光束质量，应该将两棒分别靠近两端的端镜或在腔中间相互尽量靠近。并且，将两个棒放置在靠近腔镜的位置，激光器可以高功率无损伤运转。
根据高光谱图像的特点，提出一种基于谱间去相关模型的迭代硬阈值重构算法。根据高光谱图像序列的相邻图像之间具有很强的相关性，在迭代硬阈值重构算法中建立谱间去相关模型，除去重构图像观测数据中谱间相关的观测数据，去相关后的图像的观测数据更加稀疏，重构性能更高。实验结果表明，在相同观测数目下，本算法与迭代硬阈值重构算法相比，有效提高了图像的重构质量。
从背光模组的基本结构出发,通过理论分析确定了影响导光板散射网点排布的公式, 证明了散射网点的排布规律对背光模组出光均匀度有影响。对一款背光模组商品建立了简化模型,通过光学软件TracePro模拟分析以及实验验证,证明了背光模组商品的出光均匀度还有提升的可能性。在此基础上,又重点分析了散射网点行间距的变化值,散射网点直径和散射网点初始行间距对导光板出光均匀度的影响。经过反复仿真模拟, 取得了一组参数值,可以使优化后的导光板出光均匀度比背光模组商品的出光均匀度好。研究的结论可作为导光板散射网点设计的参考,对背
A grating structure with period of half of the laser wavelength generated by focusing Cr atoms with nearly resonant laser standing wave atom lens was simulated using a quantum-mechanical model. The influence of thermal atomic source on atom focusing, incl
激光器光学部件的负载很髙。腔内功率密度在连续波运转时往往超过几个kw/cm2,同时还要求激光辐射的功率和模式即使在典型的工业环境下使用也不发生明显的变化。
为研究光子在高散射媒质中的传输特性，将高散射媒质等效为离散的球形散射体集合。在蒙特-卡罗方法的基础上，提出一种新的椭圆算法来确定高散射媒质中散射点的分布。根据米氏散射理论和光子辐射输运方程，结合模拟解析得到的散射点的分布，不同粒径、不同光程下光子散射阶数的分布以及不同散射阶数的散射光强分布，从而实现光子在高散射媒质中动态特性的数值解析。数值解析结果表明光子在高散射媒质中的传输过程本质上是光子的复散射过程，这种数值解析方法能有效解析高散射媒质中光子从单散射到复散射全光程的动态传输特性。