一种基于全光网络编码机制的关键模块研究

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:huweibo
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
We introduce a novel network-coding scheme that can be implemented in all-optical multicast networks. A simple and successful module based on the all-optical XOR gate is designed to realize the network coding scheme. The module is a key hardware component in realizing the proposed scheme. The working principle and the experimental results of the module are also presented. Experimental results show that the function of the module is sufficient in satisfying the requirements of the proposed network coding scheme.
其他文献
釆用脉冲透射式调Q方法,可使固体激光器产生极短的光脉冲。在这种调Q方式中,由共振器两端的两块100%的反射镜构成激光器的Q光路。在脉冲达到最大值时,打开输出镜,使其反射率从100%快速降到0%。这时,共振器内储存的能量被耦合输出。这种特殊的运转方式称为脉冲透射式。
期刊
An all fiber pulsed coherent Doppler lidar (CDL) system at 1.54 μm wavelength is developed for wind profiles measurements. This lidar affords 43.0-μJ pulse energy at 10-kHz pulse repetition frequency with 500-ns pulse width. The lidar is operated in monos
不同介质的激光器组合以后具有更多优点,称为混合型激光系统。文章介绍作者研制的三种混合型激光系统:气-固、固体-准分子和低-高气压混合型激光系统。
期刊
从国产机载双频激光雷达系统对地定位模型出发,分析对定位精度产生影响的各个因素,应用误差传播理论,推导该系统对地定位的综合误差模型。根据系统各传感器参数,对系统的理论定位精度进行仿真计算。对比分析机载雷达对地定位精度评定方法,设计了基于平面特征的对地定位精度评定方法,利用评定场飞行数据及高精度控制数据进行精度评价,结果表明,系统精度达到设计要求,评价方法简单可行。
期刊
呼吸频率及呼吸模式检测可用于医疗诊断以及人体健康评估。传统的医学检测器件体积大、能耗高、使用不便捷。针对高性能、低成本、便携式电子产品的迫切需求, 本工作利用氧化石墨烯材料自发极化后对湿度敏感的特性, 通过喷墨印刷方法制备了一种可以实现自供能的平面型湿度传感器。所制备的传感器对湿度响应呈现为线性关系, 并且具有优异的灵敏度、快速响应和恢复特性、多次循环稳定性和长期老化稳定性等特性。基于该传感器可以实现对于人体呼吸频率和呼吸模式等的检测。制备的湿度传感器具有制作简单、成本低、不易受人体行动及外界环境干扰等优
Nitric oxide (NO) and nitric oxide synthase (NOS) have an important role in pain signaling transmission in animal models. Low-level laser therapy (LLLT) is known to have an analgesic effect, but the mechanism is unclear. The aim of the study is to investi
期刊
In this work two different fluorochromes (Alexa 594 and Alexa 680) are conjugated to the same monoclonal antibody (Cetuximab) for obtaining a characteristic M-shaped dual-peak spectrum. Dual-labeling of Cetuximab by mixing both fluorochromes before the co
An all-fiber regenerative amplifier at 1053 nm is demonstrated. The input signal pulse energy is 75 pJ in a 3.5-ns pulse at a 1-Hz repetition rate. At a low level ofinput pump power of 110 mW, the saturated output energy is 120 nJ with fluctuation less th